Our Fiber Lasers provide a wide choice of pulse durations, repetition rates and peak powers. These lasers deliver a high power 1064nm laser beam directly to the work site via a flexible metal-sheathed fiber cable. Collimated, and then typically focused to a spot size of a few microns or less, the near diffraction-limited beam can mark, drill or machine a variety of materials. The patented pumping technique, known as parallel pumping, enables fiber devices such as fiber laser marking systems to generate almost unlimited power and provides for pumping redundancy, enhanced reliability and extended lifetimes. This leads to an estimated diode lifetime of more than 100,000 hours, or more than 11 years, of continuous operation with our fiber laser marking system. The Fiber Laser Marking System is available in all cabinet sizes as well as 5 watt, 10 watt, 20 watt, 30 watt and 50 watt models.

 Model

FB5 of FBB5

FB10 or FBB10

FB20 or FBB20

 Average Power

5W

10W

20W

 Wave Length

1060-1070

1060-1070

1070-1080

 Pulse Repetition Rate

20-80 kHz

20-80 kHz

20-80 kHz

 Beam Quality (M2)

1.4

1.4

<5

Our Nd:Yag Laser etching System is "Q-switched" or cycled at very short pulses in order to optimize peak power for a very effective material interaction. Precise beam quality with our laser etching system provides a tightly focused, accurate laser spot with exceptional power density. The laser is controlled by a DSP Board, which is inserted on the PCI Bus in a normal PC.

The Yag Laser Marking System is available in all of our different cabinet sizes as well as 5 watt, 10 watt, 20 watt, 30 watt and 50 watt models.

Model

 B5 or BB5

 B10 or BB10

 B20 or BB20

B60

 Average Power

5W

10W

20W

60W

Peak Power

MAX. 28 kW

MAX 40 kW
@10kHz

MAX 116 kW
@ 10kHz

MAX 240 kW
@ 5kHz

Pulse Frequency

25 kHz

10 -100 kHz

20 -200 kHz

5 -100 kHz

 Beam Quality

Single Mode
M² < 1.2

Single Mode
M² < 2

Single Mode
M² < 2

Single Mode
M² < 4