Beamer Laser Marking Systems l Fiber, YAG, Continuous Wave Laser Marking Machines

Model	FB5	FB10	FB20
Average Power	5W	10W	20W
Wave Length	1060-1070	1060-1070	1070-1080
Pulse Repetition Rate	20-80 khz	20-80 khz	20-80 khz
Beam Quality (M2)	1.4	1.4	<5

Our Fiber Lasers provide a wide choice of pulse durations, repetition rates and peak powers. These lasers deliver a high power 1064nm laser beam directly to the work site via a flexible metal-sheathed fiber cable. Collimated, and then typically focused to a spot size of a few microns or less, the near diffraction-limited beam can mark a variety of materials.

The patented pumping technique, known as "parallel pumping" enables fiber devices such as fiber laser marking systems to generate almost unlimited power and provide for pumping redundancy, enhanced reliability and extended lifetimes. This leads to an estimated diode lifetime of more than 100,000 hours, or more than 11 years, of continuous operation with our Fiber Laser Marking System.

The Fiber Laser Marking System is available in all cabinet sizes as well as 5, 10, 20, and 50 watt models.

Our Nd:Yag Laser etching System is "Q-switched" or cycled at very short pulses in order to optimize peak power for a very effective material interaction. Precise beam quality with our laser etching system provides a tightly focused, accurate laser spot with exceptional power density. The laser is controlled by a DSP Board, which is inserted on the PCI Bus in a normal PC.

The YAG Laser Marking System is available in all cabinet sizes as well as 5, 10, 20, and 60 watt models.

Model	B5	B10	B20	B60
Average Power	5W	10W	20W	60W
Peak Power	MAX 28 kw	MAX 40 kw @ 10 khz	MAX 116 kw @ 10 khz	MAX 240 kw @ 5 khz
Pulse Frequency	25 khz	10-100 khz	20-200 khz	5-100 khz
Beam Quality (M2)	Single Mode M2<1.2	Single Mode M2<2	Single Mode M2<2	Single Mode M2<4

Model	C10	C20	C50
Average Power	10W	20W	50W
Wave Length	1030-1120	1060-1120	1070-1090
Emission Linewidth	< 1.0 nm	< 1.0 nm	< 2.0 nm
Beam Quality (M2)	< 1.1	< 1.1	< 1.1

Our CW Fiber Laser was designed for maintenance free OEM applications. The CW diode-pumped fiber laser delivers a diffraction limited (M2 < 1.1) 1.07 micron laser beam directly to the work site via a metal-sheathed single mode fiber cable terminated by a collimator. This compact service-free laser is designed to operate under high shock, vibration and dust conditions.

The CW Laser Marking System is available in all cabinet sizes as well as 10, 20, and 50 watt models.